Description
AMGO 408-HLX 8,000 lb Extra-Tall Four-Post Boat Storage Lift
Please request a shipping quote before placing your order.
The AMGO 408-HLX is the extra-tall version of AMGO's adjustable-width boat storage lift. It lifts 15 3/4″ higher than the 408-HPX, to a maximum of 104 11/16″, giving tall boats, wakeboard towers and oversized trailers the clearance they need while leaving more headroom to park underneath. It's built for marinas, storage buildings and high-ceiling garages where vertical space is the best space you have.
Like the 408-HPX, it uses AMGO's concealed lock-control system with a manual single-point release and no air supply needed, plus primary safety locks and cable-slack protection. The diamond-plate runways adjust between two width settings to suit different trailers, foldable drive-in ramps are standard, and the ETL-certified power unit can be mounted on whichever corner suits your layout.
408-HLX Key Features
- 8,000 lb lifting capacity for over-height boats and trailers
- Extra-tall design with 15 3/4″ more lifting height than the 408-HPX
- Concealed lock-control system with manual single-point release, no air source required
- Dual safety protection: primary safety locks plus cable-slack protection
- Non-skid diamond-plate runways for secure trailer positioning
- Two runway width settings for different trailer sizes
- Power unit mounts on any corner for flexible installation
- Foldable drive-in ramps included
- Adjustable trailer jack wheel platform (42 3/8″ to 66 3/16″) included
- ETL-certified AMGO power unit
408-HLX Specifications
- Model: 408HLX
- Lift Type: Four-Post Boat Storage Lift
- Lifting Capacity: 8,000 lbs
- Lifting Time: 54 seconds
- Overall Length (including ramps): 222 1/8″
- Overall Length (without ramps): 188 9/16″
- Overall Width: 131 7/8″
- Width Between Posts: 122 3/16″
- Max Lifting Height: 104 11/16″
- Max Locking Height: 101 15/16″
- Overall Height: 113″
- Minimum Height: 5 11/16″
- Max Underneath Height: 99 15/16″
- Max Lock Height Underneath Runway: 97 3/16″
- Drive-Thru Clearance: 111″
- Width Between Runways: 46 1/2″ – 66 3/8″
- Outside Edge of Runways: 83 7/8″ – 103 3/4″
- Motor: 1.0 HP (110V) – requires 30 amp breaker
- Concrete Requirements: minimum 4″, 3,000 psi
- Shipping Dimensions: 168″ x 21″ x 30″ – 1,726 lbs
Optional Accessories (sold separately)
- Extended aluminum alloy drive-in ramps: Kit No. 40815 (2 required)
- Motor protective cover with emergency stop, for outdoor installation: Kit No. 40810
- Rubber wheel chock: P/N 40811
- Trailer extended platform, adds 24″ of length: Kit No. 40818
- AMGO J5H 5,000 lb Rolling Jack (only compatible at the narrowest runway setting)
408-HLX Manuals & Downloads
AMGO 408HLX Installation and Service Manual
Warehouse Pickup Locations (no shipping charge)
- Dallas, TX 75211
- Manning, SC 29102
408-HLX Diagrams & Spec Sheets



