Description
Signature American Freedom GT-Tilt 22 Ft. Frame Machine
Loading a low-clearance vehicle onto a fixed-bed rack usually means ramps, spotters, and a few tense minutes. The GT-Tilt skips all of that — the bed lowers to meet the car, so drive-on and drive-off take seconds instead of a production.
Once it's loaded, a 92-inch-wide, 22-foot bed gives you room to work compacts and full-size pickups on the same platform. The dual-ram lift is rated to 12,000 lbs, and towers that slide along the rail let a tech line up a pull from almost any angle without repositioning the vehicle.
Run it as a 2-tower setup out of the box, or spec 3 or 4 towers if your shop handles more complex structural work. Air-driven 10-ton hydraulics and an all-steel build mean this one's meant to stay in rotation for years, not seasons — built entirely in the U.S.
Auto Body Repair AF 9014223T Specification
Part ID: 9014223T
Bed Length (top): 22 ft.
Length with Towers Extended: 26 ft. 11 in.
Bed Width: 92 in.
Width with Towers Extended: 12 ft. 6 in.
Treadway Width: 28.5 in.
Width Between Treadways: 35.5 in.
Overall Height: 9 ft. 4 in.
Working Height: 21 in.
Hydraulics: 10 ton
Power Requirement: Air, 100 psi
Optional Tower Configurations: 2, 3, or 4 towers
Lift Capacity: 12,000 lbs. (dual-ram lift)
AF Frame Rack Body Repair Machine Special Features
Assembled in the U.S. on a heavy steel chassis built for daily shop use.
Tilting bed lowers to the ground, cutting loading time compared to fixed racks.
92-inch width and 22-foot length handle everything from coupes to crew-cab trucks.
12,000-lb dual-ram lift keeps heavier vehicles level and secure.
10-ton air-over-hydraulic system delivers steady pulling force on demand.
Rail-mounted towers reposition freely for angled or multi-point pulls.
Runs on standard shop air at 100 psi — no dedicated electrical circuit needed.
Start with 2 towers and add a 3rd or 4th as your workload grows.
- Warranty: 2 Years (Machine & Hydraulics)
AF 9014223T Manual
Coming Soon