Description
Star-A-Liner CHEETAH SF 20 Frame Rack
The SF 20 borrows the offset tower base from the smaller Cheetah models, letting the pulling towers move in closer together for tighter, more controlled pulls, then still open back up to their full 360-degree range when a job calls for it.
A 92-inch bed and 20-foot length put this rack a size class above the standard 18-foot Cheetah, while a 26-inch working height — two inches taller than most of the lineup — gives technicians a bit more room to work upright.
The 10-ton hydraulic system runs on 100 psi shop air, and at 5,500 lbs the rack is light enough to reposition within a bay but heavy enough to stay steady through a hard pull.
Auto Body Repair CHEETAH SF 20 Specification
Part ID: 9011002 (SF 20’ II with HYD)
Bed Length (top): 20 ft.
Length with Towers Extended: 25 ft. 10 in.
Bed Width: 92 in.
Width with Towers Extended: 13 ft. 4 in.
Treadway Width: 28 in.
Width Between Treadways: 36 in.
Overall Height: 7 ft. 11 in.
Tower Height: 6 ft.
Working Height: 26 in.
Weight: 5,500 lbs.
Hydraulic Power Requirement: 100 psi air
Pulling Power (Hydraulics): 10 ton
Pulling Radius: 360°
CHEETAH SF 20 Frame Rack Special Features
Offset tower bases allow towers to move closer together for tighter pulls
92-inch bed width, one size class above the 18-foot Cheetah line
26-inch working height, taller than most of the lineup
10-ton hydraulic system, 360-degree pulling radius
5,500-lb frame — stable in use, manageable to reposition
Runs on standard 100 psi shop air
- Warranty: 5 Years (Machine & Hydraulics)
CHEETAH SF 20 Manual
Coming Soon